The RaceGrade TC8 is a CAN based device that reads and allows up to 8 thermocouple temperature sensors to be connected. Typically, the RG TC8 is used for exhaust gas temperature measurement (EGT) and only works with non-amplified K-type thermocouples. Version 1.4 of TC8 is capable of being programed via CAN. This is useful if you wish to have multiple TC8s on one CAN bus, or are using a TC8 with a non Motec product. There are six different modes to choose from: The first four modes (0-3) mimic an E888, and modes four and five let you choose what CAN ID the messages are sent out on.
Does NOT Include thermocouples
-Input Temp Range: 0 to 1000°C +/-4°C
-Thermocouple Style: K-type only
-Operating Voltage Range: 9 to 24 vDC
-Operating Current Draw: < 0.1 Amps
-Operating Temp Range: -40°C to 120°C
-Dimensions: 3.5” x 2.26” x 1.0”
-Weight: 173 grams
-Current version: 1.46
-Mating Connector: ASL606-05SN
-Pin 1 – Ground
-Pin 2 – N/C
-Pin 3 – Power
-Pin 4 – CAN Lo
-Pin 5 – CAN Hi
-CAN Bus speed: 1 Mbps, 500 Kbps, 250 Kbps, 125 Kbps
-Setup is done similar to the MoTeC E888
-Channels are configured as E888 thermocouples
-Can be used on M84/Mx00/M1 ECUs and all dashes.
NOTE: When no sensor is connected to an input, the output reads between 1050 to 1250°C.